หากคุณมีคำถามใดๆ โปรดติดต่อฝ่ายบริการลูกค้า 02 2748661-3 หรืออีเมล์ contact@lableader.co.th
if you have any question, please contact customer support 02 2748661-3 email to contact@lableader.co.th
xAE-DRY Raypa autoclaves Intended use: Suitable to sterilize: unwrapped and wrapped solids, small porous objects and hollow ware type B (slightly deep and broad cavities), glass, plastic, liquids, metallic objects, waste bags. External case, top, chamber and lid made of AISI-304 stainless steel Total control by microprocessor Ten sterilization programs. Six programs are user free. Feeding water reservoir. Supplied with protecting grid for the heaters. Safety valve and thermostat. Hydraulic door blocking system while positive pressure exists in the chamber. Open lid sensor
AE-DRY Raypa autoclaves Intended use: Suitable to sterilize: unwrapped and wrapped solids, small porous objects and hollow ware type B (slightly deep and broad cavities), glass, plastic, liquids, metallic objects, waste bags. External case, top, chamber and lid made of AISI-304 stainless steel Total control by microprocessor Ten sterilization programs. Six programs are user free. Feeding water reservoir. Supplied with protecting grid for the heaters. Safety valve and thermostat. Hydraulic door blocking system while positive pressure exists in the chamber. Open lid sensor
AE-DRY Raypa autoclaves Intended use: Suitable to sterilize: unwrapped and wrapped solids, small porous objects and hollow ware type B (slightly deep and broad cavities), glass, plastic, liquids, metallic objects, waste bags. External case, top, chamber and lid made of AISI-304 stainless steel Total control by microprocessor Ten sterilization programs. Six programs are user free. Feeding water reservoir. Supplied with protecting grid for the heaters. Safety valve and thermostat. Hydraulic door blocking system while positive pressure exists in the chamber. Open lid sensor
AES Raypa autoclaves Intended use: Suitable to sterilize: culture media, glass, liquids, plastic, metallic elements,waste bags, etc. Total control by microprocessor External case, top, chamber and lid made of AISI-304 stainless steel. Supplied with protecting grid for the heater. Unsteaming pushbutton. Manual valve to drain. Safety valve and thermostat. Hydraulic door blocking system while existing positive pressure in the chamber. Open lid sensor
AES Raypa autoclaves Intended use: Suitable to sterilize: culture media, glass, liquids, plastic, metallic elements,waste bags, etc. Total control by microprocessor External case, top, chamber and lid made of AISI-304 stainless steel. Supplied with protecting grid for the heater. Unsteaming pushbutton. Manual valve to drain. Safety valve and thermostat. Hydraulic door blocking system while existing positive pressure in the chamber. Open lid sensor
AES Raypa autoclaves Intended use: Suitable to sterilize: culture media, glass, liquids, plastic, metallic elements,waste bags, etc. Total control by microprocessor External case, top, chamber and lid made of AISI-304 stainless steel. Supplied with protecting grid for the heater. Unsteaming pushbutton. Manual valve to drain. Safety valve and thermostat. Hydraulic door blocking system while existing positive pressure in the chamber. Open lid sensor
AES Raypa autoclaves Intended use: Suitable to sterilize: culture media, glass, liquids, plastic, metallic elements,waste bags, etc. Total control by microprocessor External case, top, chamber and lid made of AISI-304 stainless steel. Supplied with protecting grid for the heater. Unsteaming pushbutton. Manual valve to drain. Safety valve and thermostat. Hydraulic door blocking system while existing positive pressure in the chamber. Open lid sensor
AHS-DRY Raypa autoclaves Intended use: Suitable to sterilize: wrapped or unwrapped solids, small porous elements and hollow elements type B (slightly deep and broad cavities). glass, plastic, metallic elements, waste bags. Features: Chamber, lid and closure made of AISI-304 stainless steel Total control by microprocessor: Ten sterilization programs. Six programs are user free. 7 Litres feeding water reservoir. Automatic water filling. Automatic drying Includes RS-232 port to connect to a printer/PC. Safety: Safety valve and thermostat. Door hydraulic blocking system. Open lid sensor
AHS-DRY Raypa autoclaves Intended use: Suitable to sterilize: wrapped or unwrapped solids, small porous elements and hollow elements type B (slightly deep and broad cavities). glass, plastic, metallic elements, waste bags. Features: Chamber, lid and closure made of AISI-304 stainless steel Total control by microprocessor: Ten sterilization programs. Six programs are user free. 7 Litres feeding water reservoir. Automatic water filling. Automatic drying Includes RS-232 port to connect to a printer/PC. Safety: Safety valve and thermostat. Door hydraulic blocking system. Open lid sensor
Features Forced air convection. Adjustable temperature from room temperature + 5º C to 250º C. Temperature regulation by microprocessor. Delay & incubation time programmable between 0 and 99h Temperature homogeneity and stability according to DIN-12880. Safety according to EN-61010-1, EN-61010-2-010. Heating by electric resistance, assembled in independent chamber, allowing an optimal stabilization of temperature. External case epoxy resin painted. Inner chamber, inner side door and trays made in stainless steel AISI 304. Silicone sealing gasket. Adjustable aeration device.
Features Forced air convection. Adjustable temperature from room temperature + 5º C to 250º C. Temperature regulation by microprocessor. Delay & incubation time programmable between 0 and 99h Temperature homogeneity and stability according to DIN-12880. Safety according to EN-61010-1, EN-61010-2-010. Heating by electric resistance, assembled in independent chamber, allowing an optimal stabilization of temperature. External case epoxy resin painted. Inner chamber, inner side door and trays made in stainless steel AISI 304. Silicone sealing gasket. Adjustable aeration device.
Features Forced air convection. Adjustable temperature from room temperature + 5º C to 250º C. Temperature regulation by microprocessor. Delay & incubation time programmable between 0 and 99h Temperature homogeneity and stability according to DIN-12880. Safety according to EN-61010-1, EN-61010-2-010. Heating by electric resistance, assembled in independent chamber, allowing an optimal stabilization of temperature. External case epoxy resin painted. Inner chamber, inner side door and trays made in stainless steel AISI 304. Silicone sealing gasket. Adjustable aeration device.
Features Forced air convection. Adjustable temperature from room temperature + 5º C to 250º C. Temperature regulation by microprocessor. Delay & incubation time programmable between 0 and 99h Temperature homogeneity and stability according to DIN-12880. Safety according to EN-61010-1, EN-61010-2-010. Heating by electric resistance, assembled in independent chamber, allowing an optimal stabilization of temperature. External case epoxy resin painted. Inner chamber, inner side door and trays made in stainless steel AISI 304. Silicone sealing gasket. Adjustable aeration device.
Features Forced air convection. Adjustable temperature from room temperature + 5º C to 250º C. Temperature regulation by microprocessor. Delay & incubation time programmable between 0 and 99h Temperature homogeneity and stability according to DIN-12880. Safety according to EN-61010-1, EN-61010-2-010. Heating by electric resistance, assembled in independent chamber, allowing an optimal stabilization of temperature. External case epoxy resin painted. Inner chamber, inner side door and trays made in stainless steel AISI 304. Silicone sealing gasket. Adjustable aeration device.
Features Wall-unit for connection to tap water, suitable for the production purified and deionised water in low volumes. During deionization all inorganic substances are removed, so that an absolute ionic purity is achieved. It includes a conductivity meter for actual reading of the produced water conductivity (µS/cm).
Features Natural air convection. Adjustable temperature from 40º C to 250º C. Temperature regulation by hydraulic thermostat Homogeneity and stability according to DIN-12880. Safety according to EN-61010-1, EN-61010-2-010. Heating by electric resistance, assembled in independent chamber, allowing an optimal stabilization of temperature. External case epoxy resin painted. Inner chamber, inner side door and trays made in stainless steel AISI 304. Silicone sealing gasket. Adjustable aeration device.
Features Natural air convection. Adjustable temperature from 40º C to 250º C. Temperature regulation by hydraulic thermostat Homogeneity and stability according to DIN-12880. Safety according to EN-61010-1, EN-61010-2-010. Heating by electric resistance, assembled in independent chamber, allowing an optimal stabilization of temperature. External case epoxy resin painted. Inner chamber, inner side door and trays made in stainless steel AISI 304. Silicone sealing gasket. Adjustable aeration device.
Features Natural air convection. Adjustable temperature from 40º C to 250º C. Temperature regulation by hydraulic thermostat Homogeneity and stability according to DIN-12880. Safety according to EN-61010-1, EN-61010-2-010. Heating by electric resistance, assembled in independent chamber, allowing an optimal stabilization of temperature. External case epoxy resin painted. Inner chamber, inner side door and trays made in stainless steel AISI 304. Silicone sealing gasket. Adjustable aeration device.
Features Natural air convection. Adjustable temperature from 40º C to 250º C. Temperature regulation by hydraulic thermostat Homogeneity and stability according to DIN-12880. Safety according to EN-61010-1, EN-61010-2-010. Heating by electric resistance, assembled in independent chamber, allowing an optimal stabilization of temperature. External case epoxy resin painted. Inner chamber, inner side door and trays made in stainless steel AISI 304. Silicone sealing gasket. Adjustable aeration device.
Features Natural air convection. Adjustable temperature from room +5º C to 250º C. Temperature regulation by microprocessor. Delay & incubation time programmable between 0 and 99h Homogeneity and stability according to DIN-12880. Safety according to EN-61010-1, EN-61010-2-010. Heating by electric resistance, assembled in independent chamber, allowing an optimal stabilization of temperature. External case epoxy resin painted. Inner chamber, inner side door and trays made in stainless steel AISI 304. Silicone sealing gasket. Adjustable aeration device. Double walls and door insulated with low conductivity glass wool.